TubeOhm virtual Instruments
1:) Signal Frequency
Frequency range is selectable with a jumper on the PCB.
2:) Controls the shape of the signal.
Fully clockwise is completely random, anti clockwise is controlled by the mode switch.
3:) Attenuverters for the rate and change CVs
4:) Mode switch
Selects the anti clockwise shape.
Up: Random walk
Down: Repeating 8-step sequence
5:) Signal and gate LED
6:) CV Inputs for rate and change control(+/-5V)
7:) Gate output
A gate signal is generated whenever the CV out reaches its middle value
8:) CV output selectable via jumper between 0 to 10V and -5 to +5V
The firmware can be updated by playing back a special audio file to the CHANGE CV in jack.
To update the firmware:
international:0049 2368 57164