Shop - TubeOhm  De-Generator sample synthesizer, parts and Kits

Warenkorb ansehen /view chart

To build the de-generator we offer several possibilities.

What you need are in any case 

A power supply , 12 Volt DC  1000mA minimum Plug 5,5 / 2,1 center positive 

A multimeter  or oscilloscope is also very helpfull .

You can buy the De_Generator as a complete kit with all components or as a PCB set.

If you would like to order the components yourself, they are available from the relevant distributors such as Mouser, Reichelt, Farnell, TME... a BOM (bill of material) is released  here.

Please note that the De-Generator is NOT a beginner project. Relevant previous knowledge in electronics, soldering, component science and troubleshooting must be available.

Also we take not back soldered Parts/PCB's.

Of course we provide support by mail or in German-speaking countries also by phone and Scype. 

We are not responsible for a malfunctioning kit, electric shock or damaged speakers/amplifiers. 

Um den De-Generator zu bauen bieten wir mehrere Möglichkeiten an .

Du kannst den De-Generator als komplettes Kit  mit allen Bauteilen erwerben oder  nur die Platinen/CPU/LCD .

Was du benötigst sind auf jeden Fall 

Ein Netzteil  , 12 Volt DC  1000mA minimum Plug 5,5 / 2,1 center positive 

Meßgeräte - minimum ein Multimeter, besser  ein Oszilloskop. Ich empfehle jeden Widerstand vor dem einlöten  durchzumessen !

Möchtest du dir  die Bauteile selbst  bestellen so   gibt es diese bei den einschlägigen Distributoren wie Mouser, Reichelt , Farnell , TME  ... die komplette Bom (Materialliste) und alle Unterlagen  findest du hier.

Wir weisen darauf hin , das der De-Generator KEIN  Anfängerprojekt ist. Es müssen einschlägige Vorkenntnisse in der Elektronik , löten, Bauteilkunde und Fehlersuche vorhanden sein.Gelötete Platinen  werden nicht zurück genommen.

Wir gewähren selbstverständlich support per Mail oder in deutschsprachigen Ländern auch per Telefon und Scype. 

Wir sind nicht verantwortlich für ein nicht funktionierendes Kit, einen elektrischen Schlag oder zerstörte  Lautsprecher/Verstärker.  

high quality LCD Display 320x240 3,2 for the De-Generator 

high contrast LCD 3,3V parallel / example sample editor

high contrast LCD 3,3V parallel / example Wave editor

high contrast LCD display for the Degenerator  

Specs:

1:)   solution : 3'2 TFT  320x240

2:)   16 bit parallel port

3:)   3,3 volt

4:)   very good contrast and view angle 

the LCD comes with a 40 pin contact and can be immediately soldered into the de-generator.

before shipping all LCD displays are tested by us.

Set of PCB's for the De-Generator 

De-Generator LCD

De-Generator CPU board

here are the  basic PCB'S for the De-Generator.

A set  contains

1:) pannel board  

2:) the motherboard

3:) and the filterboard

4:) the CPU board

5:) the LCD display

6:)volume cable +2x CPU cable

De-Generator panel PCB

De-Generator MOBO pcb

De-Generator stereo filter pcb

Set of PCB's for the De-Generator

1xCPU-Board

1xMotherboard

1xFilterboard 

1xPannelboard

1x LCD

CPU Cable+Volume cable

Price 199 € include 19%Tax

plus shipping = 12,00 €

Total 211 €

CPU board for the De-Generator 

Due to the current situation it is not possible for us to manufacture the CPU boards.  So we cant deliver  this kit !

De-Generator CPU board

De-Generator CPU board, complete

Specs:

1:) ATXMEGA 128

2:) 1MB ram  sample storage =  round about 20 s sample time 

3:) SD ram card for the firmware

4:) easy firmware upgrade with the SD ram card

5:) drag and drop to the De-Generator motherboard 

De-Generator  complete Kit-all PCB's, all parts 

Due to the current situation it is not possible for us to manufacture the CPU boards.  So we cant deliver  this kit !

Degenerator complete kit 

The De-Generator complete DIY Kit contains all electronic components for the De-Generator.

1:) the motherboard - all components and the board

2:) the panel board - all components and the circuit board

3:) the filterboard (stereo) - all components and the circuit board

4:) the CPU board 

not included in the kit is the SD-Ram card and a DC power supply  and the plex case.

***Up-to-date software/firmware can be downloaded from our website.

For the operation you need a SD-Ram card 2GB minimum.

One power supply 12 Volt DC 1000 mA plug 5,5 / 2,1  center positive

inc. panel Board Kit

inc. MOBO kit

inc. stereo Filter kit

inc. CPU - board

OUT OF STOCK

De-Generator  plex case

 Plex Case 

here the parts, top, bottom, back, front and left/right side

The plexiglas housing kit for the de-generator includes all screws, rubber feet and the on/off switch.

Furthermore it is designed to be easy to assemble and has maximum stability.

De-Generator  plex case kit  contains :

1:) four rubber feets

2:) all screws 

3:) on/off switch

Price 65,95€ inc 19%Tax  Shipping is 8,90€

Total inc shipping is 74,85 €

OUT OF STOCK